We're helping businesses save: 88% of our clients said they had saved money as a direct result ofusing iHASCO*.

Covered in thiscourse

Course contents

This training course is broken down into 4 sections

  1. 1Abrasive Wheels
  2. 2Type of Wheel
  3. 3Choosing the Right Wheel
  4. 4Wheel Safety and Maintenance
An image of an abrasive wheel - Abrasive Wheel Safety Training
Diagram of the components present in an abrasive wheel

There are many different types of abrasive wheels, each designed to be used in different ways –for example, some are used for cutting, some for shaping, some for removing sharp edges and some are used for cleaning or preparing materials for another process.

本节的危险,法律和legislation and the responsibilities of both employer AND employee.

Large close up of an 80m/s type of abrasive wheel

This section looks at theBritish Standard Systemof marking and identifying wheels, including the display of supplier, dimensions, restrictions on use and operating speeds.

Large close up of a part of an abrasive wheel

Selecting the right abrasive wheel for the job is important – getting it wrong could mean you damage your material, produce poor quality work or injure yourself or others.

Choosing the correct wheel type is the first step to working safely. Here we look at thesixmain characteristics of Abrasive Wheels which you need to know about when choosing the right type of abrasive wheel for the job.

Diagram showing how to conduct a ring test as part of our abrasive wheels safety training.

Having chosen the correct wheel, the next step is to correctly set up and install the abrasive wheel.In this section, we look at how you do this, from taking an abrasive wheel out of its packaging right through to being ready to use it.

We cover ring tests and wheel mounting, which includes flanges and blotters, safety checks and wheel maintenance (including truing, dressing and balancing), handling and storage.

About this course

This brief abrasive wheels training course is designed to be used alongside practical training to increase workplace safety, awareness of legal responsibilities, and reduce the chance of an injury occurring at your workplace. Itdoes notreplace practical training.

If used incorrectly, abrasive wheels can be incredibly dangerous. In fact, over half of all recorded injuries are due to unsafe systems of work or errors made by the operator. Whether a result of broken wheels, flying particles, or serious friction burns, accidents from abrasive wheels can be severe, resulting in hospitalisation and all too often, even blindness. Abrasive wheels training ensures that the necessary control measures are in place to prevent serious incidents from occurring. This includes step-by-step instructions on handling and installing abrasive wheels, as well as information on safety checks and spotting issues.

This abrasive wheels online course is comprehensive yet concise and it can be completed in just 30 minutes. It concentrates on safety and highlights safe working practices designed for anyone who owns, operates, handles, moves, stores, or is responsible for people who operate abrasive wheels. You can easily access your course material online and this can be completed anywhere, at any time.

Are you an IIRSM member? Enjoy a 10% discount on all of our IIRSM Approved courses!

Elena Pitsiaeli, a presenter of Abrasive Wheel Safety Training

Presented by

Elena Pitsiaeli

The importance of Abrasive Wheel Safety Training

It’s important that you comply with the law and understand the positive impact this training course can have on your organisation and employees.

Find out more

Available in 41languages

All inclusive

米achine translated*content is included for free with all our popular courses.

It covers LMS navigation, course transcripts and test questions. If you don't see a course listed in the language you require, just let us know.

*Content which is not English may be machine translated and is for assistive purposes only. We cannot guarantee the accuracy of translations.

Our most popular languages

  • Italian
  • German
  • Romanian
  • French
  • Polish
  • Lithuanian


Download and print

Each of our courses ends with a multiple choice test to measure your knowledge of the material.

This Abrasive Wheel Safety Training course concludes with a 20 question multiple choice test with a printable certificate.In addition, brief in-course questions guide the user through the sections of the training and are designed to reinforce learning and ensure maximum user engagement throughout.

以及printable user certificates, training progress and results are all stored centrally in your LMS (Learning Management System) and can be accessed any time to reprint certificates, check and set pass marks and act as proof of a commitment to ongoing legal compliance.

What does my certificate include?

Your Abrasive Wheel Safety Training Certificate includesyour name,company name(if applicable),name of course taken,pass percentage,完成日期,expiry dateandstamps of approval or accreditationsby recognised authorities.

Please note if you are using our course content via SCORM in a third party LMS then we are unable to provide certificates and you will need to generate these in your host LMS yourself.

Abrasive Wheel Safety Certificate

1,042 real userreviews

100% satisfied with the course
Rating Rating Rating Rating Rating

This user gave this course a rating of 5/5 stars

a very good short course with good info
Rating Rating Rating Rating Rating

This user gave this course a rating of 5/5 stars

Very informative
Rating Rating Rating Rating Rating

A good view of all working conditions and practices

Packed with easy to understand details
Rating Rating Rating Rating Rating

Packed with easy to understand details, facts, legislation and best practice. First class

It’s a good course to take
Rating Rating Rating Rating Rating

This user gave this course a rating of 5/5 stars

Course was interesting
Rating Rating Rating Rating Rating

They were some parts of the course that was interesting

5 Stars
Rating Rating Rating Rating Rating


Rating Rating Rating Rating Rating


Why is this trainingimportant?


It's important that you comply with the law and know the ways in which it affects you and the way you work.

The main legislation relevant to using abrasive wheels is theProvision and Use of Work Equipment Regulations 1998(or P.U.W.E.R). Firstly, this document makes it clear that any work equipment and machinery must be fit for purpose. Secondly, it requires that anyone who’s going to use a piece of equipment – in this case, an abrasive wheel - must receive adequate training and safety information before using that equipment.

Every employer shall ensure that all persons who use work equipment have received adequate training for purposes of health and safety, including training in the methods which may be adopted when using the work equipment, any risks which such use may entail and precautions to be taken.

The Provision and Use of Work Equipment Regulations 1998, Section 9 (1)

The regulations deal with the work equipment and machinery used every day in workplaces and aim to keep people safe wherever equipment and machinery are used at work. PUWER replaces the Provision and Use of Work Equipment Regulations 1992, carrying forward the existing requirements with a number of changes and additions.

Explore more on legislation

Ready toget started?

We’ve helped over 10,000 organisations easily work towards legislative compliance. Let us help you too.

Frequently askedquestions

Abrasive wheels training helps to reduce injuries, improve Health and Safety compliance and it increases workers' awareness of the risks associated with using abrasive wheels.
Provision and Use of Work Equipment Regulations 1998 (PUWER) is the UK legislation that applies to the use of abrasive wheels. This states that all those involved in using abrasive wheels must be fully trained and qualified to use the equipment.
There are no legal or mandatory retraining dates for how long abrasive wheel training or a certificate of training lasts because there is no formally recognised period of validity for any health and safety training. The HSE state that refresher training should be carried out whenever it is felt necessary (for example a change in working condition, the introduction of new equipment, staff, or working practices, or when it is felt necessary to undertake refresher training). CHAS, SafeContractor, ConstructionLine, SMAS, and other members of the SSiP scheme all recommend that re-training is carried out every 3 years.
Yes, as with any iHASCO course, we offer a free trial that also gives you access to other courses in our library.